Tic Tac Tiles have an exceptional tile selection that will suit any interior. Our various patterned tiles will be sure to make a bold impact in your space such as your room, kitchen, bathroom and even RV. The embossed finish of our tiles will bounce light and make the space bright and gleaming. Our products are designed and engineered to be an easy DIY product that is permanent once it is installed. This means that you can transform your space within just a few hours without any special tools, skills, and mess. Give your home a stunning and creative high-end look with Tic Tac Tiles!
[ Features ]
|ㅤ||Tile stickers with a realistic and non-transparent tile look|
|ㅤ||Commercial-grade adhesive backing sticks, no extra glue or grout required|
|ㅤ||Light-weighted, soft and elastic, flexible, 3D epoxy finish, 3D gel-like surface|
|ㅤ||Easily cut and trim with a blade cutter or scissors for your space|
|ㅤ||Resistant to water, heat, moisture, and humidity|
|ㅤ||Hypo-allergenic, no chemicals, Heavy-metal free, formaldehyde free|
|ㅤ||Environmentally-safe, anti-mold, anti-fungal, not omit dioxins|
|ㅤ||Applicable on your flat and indoor spaces including kitchen, bathroom, laundry room, worktop, etc|
Before you begin your project, check your wall surface type. Then, clean the surface properly with a degreaser such as TSP before installing and make sure that the wall is completely dry.
Tic Tac Tiles are designed to have uneven edges to give our customer flexibility to install the tiles from either side. Depending on where you want to install first Tic Tac Tiles, you have to cut one side straight by cutting excess pieces.
Peel the first two inches of the tile without touching the adhesive backing. Slowly, align the tiles carefully and overlap only on the grout lines. On last tile. use the same piece to fill in empty space on right edge of last tile.
- DO NOT APPLY on uneven, textured surfaces, greasy, oily, brick, stone, porous wood, or gypsum walls directly.
- Prepare latex, glass wall, laminated, or painted surfaces by lightly sanding then clean surface with a strong grease remover like Tri-sodium Phosphate (TSP). Make sure the surface is completely dry at least 24 hours before installation.
- If walls and tiles are cold, the tiles will not stick well. During the winter, the wall temperature is usually lower than room temperature so make sure that your walls are warm.
|Stick & Peel Type||✓||✓||✓||✓||✓|
|Sheet Size||12" x 12"||9.8" x 9.8"||12" x 12"||9.8" x 9.8"||9.8" x 9.8"|
|Coverage size||10.3" x 12.0"||8.6" x 9.5"||10.9" x 12.0"||9.4" x 9.3"||9.4" x 9.3"|
|Coverage||0.85 sqft||0.57 sqft||0.91 sqft||0.6 sqft||0.6 sqft|